Posters (PDFs)

• Advanced Multilayer Erosion Resistant Coatings for Aerospace Applications
• Development, Structure, and Design of Multi-Layered Coating Systems for Erosion and Corrosion Applications
• Hot Section Corrosion for Gas Turbine Engines
• Interactive Coatings for Nondestructive Evaluation
• Method for Quantitative Microstructural Analysis of Thermal Barrier Coatings Produced by Electron Beam Physical Vapor Deposition
• Advanced Multilayer Erosion and Corrosion Resistant Coatings for Aerospace Applications
• Health Sensing Functions in Thermal Barrier Coatings Incorporating Rare-Earth-Doped Luminescent Sublayers
• Jet Engines and Thermal Barrier Coatings
• Net-Shaped Fabrication of Rhenium Components by EB-PVD
• Surface Modification Via Injection of High Temperature Solid Lubricant and Wear Resistant Particles During Laser-cladding
• Tailored Microstructure of EB-PVD 7YSZ Thermal Barrier Coatings
• The Advanced Coating Department at the Applied Research Lab
• Deposition of Hard Coatings by Reactive Ion Beam Assisted EB-PVD

Additional References

Book Chapter: 
D. Wolfe and T. Eden, book chapter, “Cold spray particle deposition for improved wear resistance,” The Cold Spray Materials Deposition Process—Fundamentals and Applications, ed. V.K. Champagne, Woodhead Publishing Limited and CRC Press LLC, (2007) 264-301.

Provisional Patent:
Provisional Patent PSU 2007-3371 (60/976,127): Electromagnetic Interactive “Smart” Coatings/Coating Systems for Detection of Flaws, Damage, Erosion, Corrosion, and Defects with Additional Environmental/Bio-engineering Applications, D.Wolfe, M. Kelly, B.Gabriel, Sept 2007.

Short Course:
Douglas E. Wolfe, “Determination, Causes, and Effects of Residual Stresses on Coating Microstructure and Properties”, II-VI Incorporated, 2002.

Submitted/Accepted Manuscripts:
A.K. Rai, D.E. Wolfe, and R.S. Bhattacharya, “CMAS Resistant Thermal Barrier Coatings (TBC), Journal of American Ceramic Society, submitted 2008.

M. Kelly, J.Singh, J. Todd, S. Copley, and D. Wolfe, “Quantitative Microstructural Analysis of Thermal Barrier Coatings Produced by Electron Beam Physical Vapor Deposition,” International Journal of Applied Ceramic Technology, accepted July 2007. 

M. Kelly, J.Singh, J. Todd, S. Copley, and D. Wolfe, “Metallographic Techniques for Evaluation of Thermal Barrier Coatings Produced by Electron Beam Physical Vapor Deposition,” Journal of Materials Characterization, accepted July 2007.

Publications: 
Jeffery I. Eldridge, Timothy J. Bencic, Charles M. Spuckler, Jogender Singh and Douglas E. Wolfe, “Delamination-Indicating Thermal Barrier Coatings Using YSZ:Eu Sublayers,” Journal of the American Ceramic Society, 89 [10] 3246-3251 (2006).

Jeffery I. Eldridge, Timothy J. Bencic, Charles M. Spuckler, Jogender Singh and Douglas E. Wolfe, “Erosion-Indicating Thermal Barrier Coatings Using Luminescent Sublayers,” Journal of the American Ceramic Society,89 [10] 3252-3254 (2006).